1. Product model
HG-WC-300S-015T
2. Product introduction
This product is a UV material with good high temperature resistance. After UV curing, the viscosity is reduced and it is easy to peel.
3. Product Structure

4. Main parameters of the product
Project | Technical parameter | Test standards |
Total thickness (mm) | 0.15±0.015 | GB/T7125 |
Thickness of UV adhesive layer(mm) | 0.10±0.01 |
Release film thickness(mm) | 0.05±0.005 |
Peeling force (gf/25mm) to steel plate | 300 |
|
60 | GB2792-81 |
Maximum service temperature (° C) | 180 | / |
5. Purpose
It is used for fixed products in electronic industry.
6. Storage conditions
1) Avoid direct sunlight
Room temperature storage, 23 ± 5 ℃ is preferred
2) Use within 12 months is preferred