图片展示

 

Inspection equipment

 

 


 

The company has an advanced and professional laboratory and is equipped with various measuring instruments. Under the control of specific temperature and humidity, the company tests and analyzes various materials and raw materials, and provides customers with customized material matching solutions.

Peel force tester

 

Supplier: POSITE
Model: PT-501C
Inspection standard: GB  2792-2014
Function: computer control equipment collects g, kg, N, lb information of material samples
Test accuracy: 0.1g
Scope of application: This test method is applicable to viscosity, release force and stainless steel plate 180 deg/ 90° Peel test is also applicable to other materials, such as PVC, ABS, PE, etc.

 

High speed peeling force tester

Supplier: Tuobao
Model: TH-8203S
Inspection standard: GB  2792-2014
Function: servo computer control equipment collects g, kg, N, lb information of material samples
Test accuracy: 0.1g
Scope of application: This test method is applicable to viscosity, release force and stainless steel plate 180 deg/ 90° Peel test is also applicable to other materials, such as PVC, ABS, PE, etc.

 

Hot press

 

Supplier: WXC
Model: P203
Inspection standard: engineering standard
Function: Hot pressing the material through timing and constant temperature
Test accuracy: 0.5 ℃
Applicable range:
The equipment is suitable for hot pressing of 50 * 150 width products, and the temperature reaches 0-160 ℃,
Time: 1S-999S;
Common materials include hot press adhesive bonding, pressure-sensitive adhesive testing, etc.

 

Automatic rolling machine

Supplier: Gaotai
Model: QT-6021
Inspection standard: GB  2792-1998
Function: through the automatic rolling function, the raw materials are fitted at a uniform speed;
Scope of application: standardized fitting operation of PSA test strip;
It is commonly used for single and double side adhesive+steel plate bonding, release film for single and double side adhesive bonding and other projects. The standard compression force is 2KG roller.

 

Hand held resistance tester

Supplier: VICTOR
Model: VC-385
Inspection standard: EOS/ESD-S4.1
Functions: The surface resistance tester has the function of measuring the surface resistance and grounding resistance, mainly used to measure the electrostatic consumption and the conductive performance of insulating surfaces, and to measure the surface resistance and grounding resistance, and can be used for repeated measurement;
Applicable range: used for surface resistance test of raw materials, range: 10 ^ 3&mdash& mdash; 10^12.

 

Constant temperature and humidity box

Supplier: Lugong
Model: LGD-800LA
Inspection standard: customer requirements/material specifications GB/T5170.5-2008
Temperature range: - 40 ℃~ 150 ℃
Function: The constant temperature and humidity test box is used to test the equipment for testing the performance of materials in various environments and to test the heat, cold, dry and wet resistance of various materials;
Scope of application: suitable for testing the quality of polymer materials, electronics, electric appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemicals, building materials, medical, aerospace and other products.

 

Initial adhesion tester

 

Supplier: Aisrui
Model: tape test
Inspection standard: GB4852
Function: The inclined rolling ball method is used to test the initial viscosity of the sample through the adhesive effect of the adhesive tape on the steel ball when the adhesive surface between the steel ball and the pressure-sensitive adhesive tape sample briefly contacts with a small pressure.
Scope of application: applicable to initial adhesion test of pressure-sensitive tape and other related products.

 

Colorimeter

 

Supplier: 3nh
Model: NR110
Inspection standard: GB/T3977-2008
Function:
Using laser transmission principle, place the equipment on the required product for color reading
Applicable range:
Suitable for plastic, printing ink, colored release film, colored protective film, colored PSA and other materials.

Infrared spectrum tester

 

Supplier: ThermoFisher
Model: is50
Inspection standard: BS EN 15058-2017
Function: The infrared radiation from the light source is converted into an interferogram by an interferometer, and the interferogram containing the sample information is obtained after passing through the sample, which is collected by an electronic computer and transformed by a fast Fourier transform to obtain an infrared spectrogram of absorption intensity or transmittance varying with frequency or wave number.
Scope of application: used for testing polymers, rubber, PSA, pharmaceuticals, dyes, paints, food, spices and other materials.

 

Micrometer

 

Supplier: Sanfeng
Model: MDH-25MB
Inspection standard: GB/T18779.2-2004
Function: It is a widely used measuring tool. The minimum scale value of the micrometer is 0.0001mm. The differential cylinder is equipped with a magnifying glass to visually and clearly identify and read the scale value of the corresponding micrometer.
Scope of application: used for testing the thickness (<25mm) of double-sided adhesive, single-sided adhesive, hot melt adhesive, release film, blue film, dumb film and other materials.

 

oven

 

Supplier: Shanghai Yunan
Model: DHG-9620B
Inspection standard: GB4706.22-2008/IEC 60335.2.6:2005
Function: The main function of the oven is to dry and dehumidify the material surface, age the material, soften the material, shape the material, change the stress, temper, bio pharmaceutical sterilization, food baking, etc.
Scope of application: for laboratories and laboratories of scientific research institutions, professional colleges, industrial and mining enterprises and other units to conduct various experiments, as well as production sites: such as drying, fixing, baking, wax melting, and disinfection applications.

 

Polishing instrument

 

Supplier: Dingce
Model: MP-2
Inspection standard: according to customer requirements
Function: A double disk desktop computer is used. The left disk is used for grinding and the right disk is used for polishing. It can be used by two people.
Scope of application: It is suitable for sample preparation of metallographic samples from rough grinding, fine grinding, rough polishing to fine polishing. It is a regular sample preparation equipment for enterprises, scientific research institutions and university laboratories.
   

 

 

Contact hotline:

Tel:86-0755-88606013
Mail:petty.duan@huigaogroup.com   catherine.zhou@huigaogroup.com

ADD:Xusheng R&D Building, Zone B, Gongle Industrial Road, Xixiang Street, Bao'an District, Shenzhen, China.

Copyright © db 2022-2025, All Rights Reserved

 

 

Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.