1. Product model
HG-110T-S600
2. Product introduction
This product is a double-sided adhesive tape coated with weak adhesive and strong adhesive on both sides of PI substrate, which has good high temperature resistance.
3. Product Structure

4. Main parameters of the product
Project | Technical parameter | Test standards |
Total thickness (um) | 210±25 | / |
Release film thickness (um) | 50±5 | / |
Weak adhesive thickness (um) | 10±2 | / |
PI base material thickness (um) | 50±5 | / |
Strong adhesive thickness (um) | 50±5 | / |
Release film thickness (um) | 50±5 | / |
If the adhesive is sticky (gf/25mm) | 3-8 | GB/T2792-2014 |
Strong adhesive (gf/25mm) to steel plate | 400-600 | GB/T2792-2014 |
Maximum service temperature (° C) | 200 | / |
5. Test conditions
Condition: 200 ℃, 1 hour Method: stick the material on the test steel plate, place it at 200 ℃ for 1 hour, and confirm that there is no residual adhesive after peeling.
6. Purpose
It is used for fixed products in electronic industry.
7. Storage conditions
1) Avoid direct sunlight
Room temperature storage, 23 ± 5 ℃ is preferred
2) Use within 12 months